Tips From the Moving Company Pros: Ways To Move a Pinball Device



With pinball making a huge revival across the country, Mild Giant wants to ensure that these timeless, beautiful devices remain damage-free while being transported. Oh, and we want the individuals moving them to be safe, too.

At first glimpse, pinball makers can appear intimidating to move since of their fragility, weight, and size. Thankfully, our competent Giants have a couple of tricks up their sleeves to ensure your pinball is moved with ease.
Folding Down the Headbox

The bulk of modern-day pinballs (made in the last 20 years or two) have a hinge system which permits the headbox to be folded down. Early pinball makers had their headboxes bolted on, using either two or 4 bolts. All Electro-Mechanical pinballs utilize this system, along with the early Strong State makers.

Later on machines have hinges and use a locking system to keep the headbox upright. There might also be two bolts inside as included security, in case the latch is broken or unintentionally un-latched.
Electro-Mechanical Pinballs

For Electro-Mechanical pinball devices, you require to remove the headbox rear access panel to get to the bolts and plugs within. Usually this panel has a lock on it to keep it in place, but gradually the secret may have been lost. On a regular basis, there is a screw keeping this panel in location.

As soon as inside, eliminate the bolts and disconnect the big adapters that have wiring going down into the device. You might wish to label these ports to put them back in the ideal area, but they ought to be different sizes, making it tough to plug back improperly.

You can now remove the headbox completely, or fold the headbox down onto the playfield glass. Ensure you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will assist keep the back glass in place.
Early Solid State Pinballs

For early Solid State Pinballs, you will require to get rid of the back glass. There is a lock situated on the headbox in one of 3 locations: the left-hand side at the top, right-hand side at the top or on top of the headbox in the.

When opened, get rid of the back glass by raising it up utilizing the lift channel (at the bottom of the glass), and then pull it out from the bottom.

Then, open up the back box lamp panel by raising the lock situated on either the left-hand side or right-hand side. The panel can now swing out to you, and provide you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs need you to raise up the light panel in order to swing it open.

Now that you are inside, you can remove the bolts, and any plugs that have wires going down into the device. You might wish to identify these plugs to put them back in the right spot. You may not have to eliminate the plugs, as the electrical wiring needs to be long enough to permit the headbox to be folded down.

At this point, you can lock up the lamp panel and replace the back glass.
Modern Solid State Pinballs

For Data East, Sega, and Stern Modern pinballs, there is a turnable lock system situated at the back of the headbox. Utilizing the provided secret, turn the lock 90 ° counter-clockwise.

For Williams, Bally, and Gottlieb, you can easily unlatch the back box at the back of the machine. This is a simple setup and requires no tools.

You're done if you can now fold down the head box onto the cabinet. Make certain great post to read you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will likewise help keep the back glass in place.

You need to get within if you can not fold the head box down. There is a lock situated at the top of the back glass in the center. Utilize the provided secret to unlock, and get rid of the back glass by lifting it up from the bottom, and then pulling it out from the bottom.

Next, you will need to remove the display panel. (Some newer Williams and Bally pinballs do not have a separate amp panel, read this article it is part of the back glass panel. And later Sega and Stern pinballs use a fluorescent tube for the back glass lighting).

Eliminate the two bolts, put the back box back together, and fold down the head box onto the cabinet. Ensure you use some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will likewise assist keep the back glass in location.
Eliminating the Legs.

Pinball Maker legs are held in location by 8 bolts. The modern-day pinballs have captive nuts or threaded plates inside for the bolts to screw into.

These threaded plates and captive nuts can be harmed, and the usage of additional nuts might have been needed. If this holds true, you will have to open the front door of the pinball, slide out the playfield glass, and raise up the playfield.

With the front door (coin door) open, move the lock down bar lock throughout and eliminate the lock down bar. Then move out the playfield glass, and put in a safe location. Next, raise the playfield by putting your hand where the ball drains, and lift the playfield up.

You ought to now have access to any nuts that may have been used. Once any nuts have been removed, replace the playfield glass and lock down bar, and lock the front door.

Make certain to mark or keep in mind which legs are for the front and back, as they will be changed in a different way to match.
Filling the Pinball.

You are now all set to carry your pinball device. Prior to you pack it, ensure you eliminate the pinballs so they don't bounce around during transport.

If you are moving the pinball utilizing a van or SUV, it might be simpler to remove the legs just prior to loading the maker. Get a good friend to have and assist one of you supporting the pinball, while the other eliminates the front legs.

Make sure you strap the pinball in, as you do not want it moving if you have to stop unexpectedly!

For Electro-Mechanical pinball makers, you require to eliminate the headbox rear access panel to gain access to the bolts and plugs inside. (Some more recent Williams and Bally pinballs do not have a different amp panel, it is part of the back glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).

If you are moving the pinball using a van or SUV, it may be easier to get rid of the legs simply prior to filling the device. Grab a friend to help and have one of you supporting the pinball, while the other gets rid of the front legs.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “Tips From the Moving Company Pros: Ways To Move a Pinball Device”

Leave a Reply

Gravatar